Check items to add to the cart or select all
Product Description
The SIMJ1939-010, Au SAE J1939 Simulator 2.00A Engine Basic Plus Edition (Sr), can generate SAE J1939 signal for Diesel Engines.
Au J1939 Simulator Engine Basic 2.00A Plus Ed. = Engine Basic 2.00A non-plus Ed. + Remote Terminal on PC
It includes all Au SAE J1939 Simulator Engine Basic 2.00A non-plus edition functions, plus the following capabilities:
1. Display simulated J1939 information on a PC screen
2. Remote control capability from a PC.
Supported J1939 parameters and features
Engine Speed (RPM)
Wheel Based Vehicle Speed (MPH)
Engine Total Hours of Operation
Response Request for Engine Total Hours of Operation
Engine Clock
Response for Engine Clock Request
Engine Clock setup
Engine Oil Pressure
Engine Coolant Temperature
Battery Potential (Voltage) Switched
SAE J1939 Fuel Level
Engine Turbocharger Boost Pressure
Engine Instant Fuel Economy
Engine Fuel Rate
Accelerator Pedal Position
Engine Intake Manifold 1 Temperature
Engine Load % at Current Speed
Engine Trip Distance
Total Vehicle Distance
Cruise light
Engine Address Claim
Engine Address CANNOT Claim
Engine Response Request for Address Claim
Engine Address Conflict Response with Contention
Engine DM1 Red Stop Lamp OFF status
Engine DM1 Amber Lamp OFF status
SAE-J1939 Acknowledge protocol
Engine DM1 Health-heart-beat*
Water in fuel Indicator Health-heart-beat*
Engine Oil Temperature
Engine Fuel Temperature (F)
Engine Oil Level (%)
Engine Coolant Pressure (PSI)
Engine Coolant Level (%)
Engine IS (Idle Shutdown) has Shutdown Engine
Engine IS Driver Alert Mode
Engine IS Timer Override
Engine IS Timer State
Engine IS Timer Function
A/C High Pressure Fan Switch
Refrigerant Low Pressure Switch
Refrigerant High Pressure Switch
Engine Wait to Start Lamp
EPS (Engine Protection System)has Shutdown Engine
EPS Approaching shutdown
EPS Timer Override
EPS Timer State
EPS Configuration
Engine Alarm Acknowledge
Engine Alarm Output Command Status
Engine Air Shutoff Command Status
Engine Overspeed Test
Engine Air Inlet Pressure
Engine Exhaust Gas Temperature
Actual Engine - Percent Torque
Nominal Friction - Percent Torque
Engine Exhaust Gas Recirculation (EGR) Mass Flow Rate (MFR)
Engine Inlet Air Mass Flow Rate (MFR)
Vehicle Identification Number (VIN)
Response for VIN global request
Response for VIN specific request
SAE-J1939 Transport Protocol: TP.CM.BAM, TP.DT
SAE-J1939 Transport Protocol: TP.CM.RTS, TP.CM.CTS, TP.DT, TP.CM.EndOfMsgACK, TP.Conn.Abort
* Health-heart-beat: normal signal only, no warning, and signal repeats in SAE defined “heart-beat” rate.
Au J1939 Simulator Engine Basic 2.00A Plus Ed. = Engine Basic 2.00A non-plus Ed. + Remote Terminal on PC
It includes all Au SAE J1939 Simulator Engine Basic 2.00A non-plus edition functions, plus the following capabilities:
1. Display simulated J1939 information on a PC screen
2. Remote control capability from a PC.
Supported J1939 parameters and features
Engine Speed (RPM)
Wheel Based Vehicle Speed (MPH)
Engine Total Hours of Operation
Response Request for Engine Total Hours of Operation
Engine Clock
Response for Engine Clock Request
Engine Clock setup
Engine Oil Pressure
Engine Coolant Temperature
Battery Potential (Voltage) Switched
SAE J1939 Fuel Level
Engine Turbocharger Boost Pressure
Engine Instant Fuel Economy
Engine Fuel Rate
Accelerator Pedal Position
Engine Intake Manifold 1 Temperature
Engine Load % at Current Speed
Engine Trip Distance
Total Vehicle Distance
Cruise light
Engine Address Claim
Engine Address CANNOT Claim
Engine Response Request for Address Claim
Engine Address Conflict Response with Contention
Engine DM1 Red Stop Lamp OFF status
Engine DM1 Amber Lamp OFF status
SAE-J1939 Acknowledge protocol
Engine DM1 Health-heart-beat*
Water in fuel Indicator Health-heart-beat*
Engine Oil Temperature
Engine Fuel Temperature (F)
Engine Oil Level (%)
Engine Coolant Pressure (PSI)
Engine Coolant Level (%)
Engine IS (Idle Shutdown) has Shutdown Engine
Engine IS Driver Alert Mode
Engine IS Timer Override
Engine IS Timer State
Engine IS Timer Function
A/C High Pressure Fan Switch
Refrigerant Low Pressure Switch
Refrigerant High Pressure Switch
Engine Wait to Start Lamp
EPS (Engine Protection System)has Shutdown Engine
EPS Approaching shutdown
EPS Timer Override
EPS Timer State
EPS Configuration
Engine Alarm Acknowledge
Engine Alarm Output Command Status
Engine Air Shutoff Command Status
Engine Overspeed Test
Engine Air Inlet Pressure
Engine Exhaust Gas Temperature
Actual Engine - Percent Torque
Nominal Friction - Percent Torque
Engine Exhaust Gas Recirculation (EGR) Mass Flow Rate (MFR)
Engine Inlet Air Mass Flow Rate (MFR)
Vehicle Identification Number (VIN)
Response for VIN global request
Response for VIN specific request
SAE-J1939 Transport Protocol: TP.CM.BAM, TP.DT
SAE-J1939 Transport Protocol: TP.CM.RTS, TP.CM.CTS, TP.DT, TP.CM.EndOfMsgACK, TP.Conn.Abort
* Health-heart-beat: normal signal only, no warning, and signal repeats in SAE defined “heart-beat” rate.
Additional Information
| Version | 2.00A |
| Edition | Engine Basic Plus Edition |
| Au Part # | SIMJ1939-010 |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
