Product Description
This product is designed for those customers who only need the capability of handling through-hole components.
The 2-in-1 Mini-Lab is a handy, low cost tool capable of programming, debugging and testing Flash-based PIC Microcontroller, KEELOQ HCS, MCP250xx and EEPROMs. It is able to connect through hole chips with multiple programmers (e.g. Au Group Electronics BB0703, BB0703+, microchip PICkit2, ICD2, ICD3, RealICE, etc.) via a "6-pin ICSP header" or a "RJ12 6P6C socket". Through-hole packaging (DIP 8, 14, 18, 20, 28, 40) integrated circuits are supported. It also provides unique lab-test circuits, such as: on-board voltage regulators (5V, 3.3V, and 2.5V), pull-up circuit, pull-down circuit, cap connection, bidirectional voltage-level translator, and LEDs, etc.
Major Features:
* Dimension: 3.93"L x 3.13"W x 1"H (100mm x 80 x 25 mm)
* Power supply connector: Ø2.1mm, 9V input, 100 mA, positive center
* Operating Temperature: -25 ~ +70°C
* ZIF Life Cycle: up to 25,000~50,000
* ZIF Contact Rating: 50V DC, 100mA
* ZIF insulation resistance: 100M ohm minimum, 1000M ohm normal
* ZIF Dielectric Withstanding Voltage: 500V DC min for 60 Seconds
* Support Through-hole DIP chipset programming
* Support On-board lab-test
* Three On-board voltage supplies: 5V, 3.3V, 2.5V, (100 mA Max. total)
* Dual bidirectional I2C/SMBus voltage-level translator
* RJ12 6P6C socket: compatible with BB0703/BB0703+(s), ICD2/ICD3/RealICE etc.
* 6-pin ICSP header: compatible with Microchip PICkit 2
* mini-Lab circuits: 6-LEDs, 3 pull-up, 2 pull-down, 1 capacitor for debugging/testing
* Power LED will illuminate whenever programming activity occurs on the board
* Jump wire technology guarantee no worry about pin compatibility for future PIC chips
* 12 pieces jumper wires included and extra jumper wires can be ordered separately.
* DIP ZIF socket - compatible with any 8, 14, 18, 20, 28, and 40-pin PIC microcontrollers or other type of semiconductor chips in DIP packaging (0.300-0.600" body widths)
The 2-in-1 Mini-Lab is a handy, low cost tool capable of programming, debugging and testing Flash-based PIC Microcontroller, KEELOQ HCS, MCP250xx and EEPROMs. It is able to connect through hole chips with multiple programmers (e.g. Au Group Electronics BB0703, BB0703+, microchip PICkit2, ICD2, ICD3, RealICE, etc.) via a "6-pin ICSP header" or a "RJ12 6P6C socket". Through-hole packaging (DIP 8, 14, 18, 20, 28, 40) integrated circuits are supported. It also provides unique lab-test circuits, such as: on-board voltage regulators (5V, 3.3V, and 2.5V), pull-up circuit, pull-down circuit, cap connection, bidirectional voltage-level translator, and LEDs, etc.
Major Features:
* Dimension: 3.93"L x 3.13"W x 1"H (100mm x 80 x 25 mm)
* Power supply connector: Ø2.1mm, 9V input, 100 mA, positive center
* Operating Temperature: -25 ~ +70°C
* ZIF Life Cycle: up to 25,000~50,000
* ZIF Contact Rating: 50V DC, 100mA
* ZIF insulation resistance: 100M ohm minimum, 1000M ohm normal
* ZIF Dielectric Withstanding Voltage: 500V DC min for 60 Seconds
* Support Through-hole DIP chipset programming
* Support On-board lab-test
* Three On-board voltage supplies: 5V, 3.3V, 2.5V, (100 mA Max. total)
* Dual bidirectional I2C/SMBus voltage-level translator
* RJ12 6P6C socket: compatible with BB0703/BB0703+(s), ICD2/ICD3/RealICE etc.
* 6-pin ICSP header: compatible with Microchip PICkit 2
* mini-Lab circuits: 6-LEDs, 3 pull-up, 2 pull-down, 1 capacitor for debugging/testing
* Power LED will illuminate whenever programming activity occurs on the board
* Jump wire technology guarantee no worry about pin compatibility for future PIC chips
* 12 pieces jumper wires included and extra jumper wires can be ordered separately.
* DIP ZIF socket - compatible with any 8, 14, 18, 20, 28, and 40-pin PIC microcontrollers or other type of semiconductor chips in DIP packaging (0.300-0.600" body widths)
Additional Information
| Au Part # | ML-2IN1 |
|---|
My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Recently Viewed Products
