CB0703
Do It Yourself Printed Circuit Board for PIC Programmer
| Items 1 to 12 of 15 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
CBL-RJ12-POGO: Flexible RJ12 Cable with 6-pin POGO Connector
$16.99
CBL-RJ12-POGO: Flexible RJ12 Cable with 6-pin POGO Connector Learn More
CON-6PIN-POGO: 6 Pin Pogo Connector
$9.99
6-pin pogo connector with standard 0.100 inch (2.54mm) pitch. Learn More
CB0703 - Bare Printed Circuit Board for BB0703
$5.00
CB0703 - Bare Printed Circuit Board for BB0703
Dimension: 2.84" X 1.26" (72 X 32 mm) Learn More
Dimension: 2.84" X 1.26" (72 X 32 mm) Learn More
ICKCB0703: CB0703 Electronic Components Kits without U1, U3, U4
$11.99
Already have the chips? ICKCB0703 is what you need, It includes all necessary CB0703 Electronic Components except for U1, U3, U4 Learn More
CKCB0703 - Electronic Components Kit for CB0703 with blank PIC18F2550
$19.99
CKCB0703 - All necessary Electronic Components for assembling a BB0703. PIC18F2550 is a blank chip Learn More
PPIC18F2550 - Pre-programmed PIC18F2550
$8.99
PPIC18F2550 - Pre-programmed PIC18F2550 with PICKit 2 firmware. Learn More
Combo0703 - Combo DIY Kit for CB0703 with blank programmed PIC18F2550
$29.99
Combo0703 - All you need to built a completed BB0703, PIC18F2550 is blank Learn More
Combo0703-PP - Combo DIY Kit for CB0703 with Pre-programmed PIC18F2550
$34.99
Combo0703-PP - All you need to built a completed BB0703. PIC18F2550 is pre-programmed with PICKit 2 firmware. Learn More
PWR-912V-CP: Wall Mount AC/DC Power Supply - Positive Center
$14.99
Wall mount AC/DC power supply, positive center
110V input, 12V 500mA output. Learn More
110V input, 12V 500mA output. Learn More
CBL-RJ12-STD: RJ12 6 pin Standard Cable
$2.99
RT12 standard cable is a 6-inch cable with 6 twisted, shielded wires in between two RS12 6P 6C connectors on both ends.
Signals of 6 wires are swapped, and the signal output of the RJ12 6-pin standard cable from BB0703 (PICkit 2) is not compatible with ICD2 and its cables Learn More
Signals of 6 wires are swapped, and the signal output of the RJ12 6-pin standard cable from BB0703 (PICkit 2) is not compatible with ICD2 and its cables Learn More
CBL-RJ12-RVS: RJ12 6 pin Reverse Cable
$2.99
It is a 6- inch cable with 6 twisted, shielded wires between 2 RJ12 6P 6C connectors on both ends.
signals of 6 wires not swapped, BB0703 (PICkit 2) and a RJ12 6-pin reverse cable can be used directly with target board/programmer developed for ICD2, ICD3, Learn More
signals of 6 wires not swapped, BB0703 (PICkit 2) and a RJ12 6-pin reverse cable can be used directly with target board/programmer developed for ICD2, ICD3, Learn More
| Items 1 to 12 of 15 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
