Hardware
| Items 1 to 12 of 18 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
CBL-RJ12-POGO: Flexible RJ12 Cable with 6-pin POGO Connector
$16.99
CBL-RJ12-POGO: Flexible RJ12 Cable with 6-pin POGO Connector Learn More
CON-6PIN-POGO: 6 Pin Pogo Connector
$9.99
6-pin pogo connector with standard 0.100 inch (2.54mm) pitch. Learn More
ML-2IN1: 2-in-1 Mini-lab
$34.99
It is a low cost programming, debugging and testing tool for DIP8, 14, 18, 20, 28, 40 IC. On-board voltage regulators (5V, 3.3V, and 2.5V), pull-up circuit, pull-down circuit, cap connection, bidirectional voltage-level translator, and LEDs, etc. are also provided Learn More
CB0703 - Bare Printed Circuit Board for BB0703
$5.00
CB0703 - Bare Printed Circuit Board for BB0703
Dimension: 2.84" X 1.26" (72 X 32 mm) Learn More
Dimension: 2.84" X 1.26" (72 X 32 mm) Learn More
ML-3IN1: 3-in-1 Mini-lab
$79.99
It is a handy programming, debugging and testing tool for both SOIC-SMD and DIP IC. On-board voltage regulators (5V, 3.3V, and 2.5V), pull-up circuit, pull-down circuit, cap connection, bidirectional voltage-level translator, and LEDs etc. are also provided. Learn More
ICKCB0703: CB0703 Electronic Components Kits without U1, U3, U4
$11.99
Already have the chips? ICKCB0703 is what you need, It includes all necessary CB0703 Electronic Components except for U1, U3, U4 Learn More
CBL-JWFF-12PC: 12 Pieces of Jumper Wires (F/F)
$5.99
12 pieces of flexible jumper wires with female connectors on both ends, work perfect with Au Group Electronics 3-in-1 mini Lab or 2-in-1 mini Lab. Learn More
CKCB0703 - Electronic Components Kit for CB0703 with blank PIC18F2550
$19.99
CKCB0703 - All necessary Electronic Components for assembling a BB0703. PIC18F2550 is a blank chip Learn More
PPIC18F2550 - Pre-programmed PIC18F2550
$8.99
PPIC18F2550 - Pre-programmed PIC18F2550 with PICKit 2 firmware. Learn More
Combo0703 - Combo DIY Kit for CB0703 with blank programmed PIC18F2550
$29.99
Combo0703 - All you need to built a completed BB0703, PIC18F2550 is blank Learn More
Combo0703-PP - Combo DIY Kit for CB0703 with Pre-programmed PIC18F2550
$34.99
Combo0703-PP - All you need to built a completed BB0703. PIC18F2550 is pre-programmed with PICKit 2 firmware. Learn More
| Items 1 to 12 of 18 total |
Page:
|
Show per page |
| View as: List Grid |
Sort by
|
