This is a hard to find Programming cable with a Pogo-pin connector on one end, and a RJ12 connector on the other end. This cable provides fast and reliable connections between programmer and chips on a circuit board. This cable can be used with any programmer with RJ12 connectors, e.g. BB0703(s), ICD2, ICD3, RealICE, etc. All pogo pins are gold plated which will secure both good electric contact and long term durability.
Standard pogo pin header is Radius (Figure 2); optional serrated pin header (Figure 3) is available.
Three different colors in fixture are available: blue, white, and black.

Specification:
Current rating: 3 amps continuous
Spring force: 4.0 ~ 7.0 oz each pin @ 0.100 inch travel
Typical contact resistance: < 60 mOhm
Working travel: 0.100~0.160 inch
Pogo pin Material: BeCu with gold plated
Recommended through-hole PCB pads pattern (mating with radius pogo pins): ID = 1 mm, OD = 2mm, and pin pitch = 2.54 mm (100 mil).
Recommended SMD PCB pads pattern (mating with serrated pogo pins): OD = 2mm, and pin pitch = 2.54 mm (100 mil).

Pin 1 is marked on the fixture, Here is a list of ICSP signal definition on the Pogo pin (when it is connect with BB0703/BB0703+):
Pin 1: Vpp
Pin 2: Vdd
Pin 3: Gnd
Pin 4: PGD
Pin 5: PGC
Pin 6: Aux/Not used