You have no items in your shopping cart.
Product Description
CBL-RJ12-Program: RJ12 Cable to Board for Programming
When the cable "CBL-RJ12-Program" is connected to Au Group Electronics BB0703 / BB0703+ / CB0703 (via a RJ12 reverse cable), or connect to ICD2 / ICD3 / RealICE (via a RJ12 standard cable), the ICSP signals on the pig-tail end are defined as Table 1.
Table 1
Pin # Color Code ICSP Signal
1 White VPP
2 Black VDD
3 Red GND
4 Green ICSPDAT/PGD
5 Yellow ICSPCLK/PGC
6 Blue AUX/NC
Note:
1. To use table 1, a RJ12 reverse cable (part #: CBL-RJ12-RVS) must be used with BB0703/BB0703+.
2. To use table 1, a RJ12 standard cable (part #: CBL-RJ12-STD) must be used with ICD2/ICD3/RealICE.
When the cable "CBL-RJ12-Program" is connected to Au Group Electronics BB0703 / BB0703+ / CB0703 (via a RJ12 reverse cable), or connect to ICD2 / ICD3 / RealICE (via a RJ12 standard cable), the ICSP signals on the pig-tail end are defined as Table 1.
Table 1
Pin # Color Code ICSP Signal
1 White VPP
2 Black VDD
3 Red GND
4 Green ICSPDAT/PGD
5 Yellow ICSPCLK/PGC
6 Blue AUX/NC
Note:
1. To use table 1, a RJ12 reverse cable (part #: CBL-RJ12-RVS) must be used with BB0703/BB0703+.
2. To use table 1, a RJ12 standard cable (part #: CBL-RJ12-STD) must be used with ICD2/ICD3/RealICE.
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
